Same Boat, New Motor

[Tin-Can]

**Picked up my re-motored boat from Fred’s Marine today. That new 25 hp Merc sure does look lots bigger than the 15 hp I’ve had on the boat since I bought in new in 2007. Now I have a power trim & tilt, ought to eliminate the need to carry bags of ballast sand in the bow to keep the bow down where I can see over it when it’s just me in the boat. Longer shaft dictated the addition of a transom saver, and the rearanging of my storage shed so the boat would fit in with the motor aimed slightly back instead vertical. Hope to get it out on the water for a test run this weekend. **

[Mooseman75]

Forrest that is a nice looking motor you got yourself. I had a 20 hp on a 16’ aluminum boat and it pushed it along pretty good. (At least till I hit hit the finger on bird island and screwed my gears up) but I’m guessing that 25 will give you a new perspective on life haha. Enjoy it and hope to see you down here at Utah lake sometime…

[Tin-Can]

@Mooseman75

Forrest that is a nice looking motor you got yourself. I had a 20 hp on a 16’ aluminum boat and it pushed it along pretty good. (At least till I hit hit the finger on bird island and screwed my gears up) but I’m guessing that 25 will give you a new perspective on life haha. Enjoy it and hope to see you down here at Utah lake sometime…

It is gonna be a little bit of a new learning curve. Controls are a bit different. No Fwd and Rev shift lever, it’s all part of the tiller throttle. But it is EFI, so no carbs or choke. Bigger prop, same pitch.
I will be getting down to UL more often this summer after retirement in June.

[Bduck]

Nice upgrade addition Forrest. Now you have to get it out on Willard to get it broke in so you can be ready for those ice off lakes coming.

[SkunkedAgain]

Congrats Forest, that ought to make a pretty big difference for you… 10 ponies will scoot you right along… hang on tight... you might be able to outrun Pat’s machine now… JK.. Jeff

[Piscophilic]

@Tin-Can

**Picked up my re-motored boat from Fred’s Marine today. That new 25 hp Merc sure does look lots bigger than the 15 hp I’ve had on the boat since I bought in new in 2007. Now I have a power trim & tilt, ought to eliminate the need to carry bags of ballast sand in the bow to keep the bow down where I can see over it when it’s just me in the boat. Longer shaft dictated the addition of a transom saver, and the rearanging of my storage shed so the boat would fit in with the motor aimed slightly back instead vertical. Hope to get it out on the water for a test run this weekend. **

Looks like agreat addition/upgrade! I hope to see you on UL later in spring. I had neck surgery yesterday and I feel like going fishing, but the Doc says 4-weeks and I should be ready.

[Tin-Can]

@elkantlers

It is gonna be a little bit of a new learning curve. Controls are a bit different. No Fwd and Rev shift lever, it’s all part of the tiller throttle. But it is EFI, so no carbs or choke. Bigger prop, same pitch.
I will be getting down to UL more often this summer after retirement in June.

You will get used to the controls pretty quick. I bought a Merc last year and really like not haveing to shift the lever.

With the wet weather most of the day today, I spent several hours in the boat shed. Installed my trolling plate on the new motor. Had to build up a new cable to deploy it. New motor bigger, needed longer cable. Rigged a new one with plastic coated wire rope. Should keep the cable from scratchin up the side of motor. Took me 2 trips to 2 different Lowes to get what I needed. But that job is done. More rain forecast for tomorrow, so will work on getting all the stuff I tote in the boat put back in. Sunday forecast is better, may get a chance to do a first run ops check at Willard. Might even take some fishing gear

[wyoguy]

@Tin-Can

“elkantlers” pid=‘1095991’ dateline=‘1584675724’ wrote:

It is gonna be a little bit of a new learning curve. Controls are a bit different. No Fwd and Rev shift lever, it’s all part of the tiller throttle. But it is EFI, so no carbs or choke. Bigger prop, same pitch.
I will be getting down to UL more often this summer after retirement in June.

You will get used to the controls pretty quick. I bought a Merc last year and really like not haveing to shift the lever.

With the wet weather most of the day today, I spent several hours in the boat shed. Installed my trolling plate on the new motor. Had to build up a new cable to deploy it. New motor bigger, needed longer cable. Rigged a new one with plastic coated wire rope. Should keep the cable from scratchin up the side of motor. Took me 2 trips to 2 different Lowes to get what I needed. But that job is done. More rain forecast for tomorrow, so will work on getting all the stuff I tote in the boat put back in. Sunday forecast is better, may get a chance to do a first run ops check at Willard. Might even take some fishing gear

Fishing gear…never leave home without it!

[RockyRaab2]

Any time you need ballast in the front, my friend…

[Tin-Can]

@TubeDude

Just add fish.

I’m sure I will, eventually

[Fishgiver1]

Nice set up similar to my Lund 16, you will like having to be able to trim the motor, especially when you leave the south ramp area at WB.