# Merc outboard motor question

**URL:** <https://forum.bigfishtackle.com/t/merc-outboard-motor-question/233259>\
**Category:** Utah Fishing General\
**Created:** [March 23, 2014, 2:45pm UTC](https://forum.bigfishtackle.com/t/merc-outboard-motor-question/233259 "2014-03-23T14:45:13Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![JayWeymouth](https://avatars.discourse-cdn.com/v4/letter/j/34f0e0/32.png) [@JayWeymouth](https://forum.bigfishtackle.com/u/JayWeymouth)\
**Post date:** [March 23, 2014, 2:45pm UTC](https://forum.bigfishtackle.com/t/merc-outboard-motor-question/233259/1 "2014-03-23T14:45:13Z")

</div>

I have a 75 hp Merc(2011) and seems I have a little problem that just popped up.  
Starts quick, no problem idling, no problem with slow acceleration, but when I push quick to full throttle it will hesitate and bog down??

---

<div class="post-metadata">

**Author:** ![Benthook](https://avatars.discourse-cdn.com/v4/letter/b/e480ec/32.png) [@Benthook](https://forum.bigfishtackle.com/u/Benthook)\
**Post date:** [March 23, 2014, 3:50pm UTC](https://forum.bigfishtackle.com/t/merc-outboard-motor-question/233259/2 "2014-03-23T15:50:50Z")

</div>

I have a 2009 60 HP. EFI merc. Outboard with the same problem. But only @ high altitude. I have spoken with the dealer ship about this and they told me. That I should put a lower pitch prop on or do a lower unit gear change. For more bottom end torque. I only occasionaly boat above 8000ft. And cant justify the cost for the gear change.[reply][/reply] Good luck.

---

<div class="post-metadata">

**Author:** ![curt69](https://avatars.discourse-cdn.com/v4/letter/c/bc8723/32.png) [@curt69](https://forum.bigfishtackle.com/u/curt69)\
**Post date:** [March 23, 2014, 7:38pm UTC](https://forum.bigfishtackle.com/t/merc-outboard-motor-question/233259/3 "2014-03-23T19:38:50Z")

</div>

If this is a new problem , put some Seafoam fuel treatment in .

---

<div class="post-metadata">

**Author:** ![fish\_or\_die](https://avatars.discourse-cdn.com/v4/letter/f/13edae/32.png) [@fish\_or\_die](https://forum.bigfishtackle.com/u/fish_or_die)\
**Post date:** [March 23, 2014, 8:08pm UTC](https://forum.bigfishtackle.com/t/merc-outboard-motor-question/233259/4 "2014-03-23T20:08:13Z")

</div>

Might be an electrical problem. Check all your spark plugs and make sure they’re all firing.

---

<div class="post-metadata">

**Author:** ![wiperhunter2](https://avatars.discourse-cdn.com/v4/letter/w/3d9bf3/32.png) [@wiperhunter2](https://forum.bigfishtackle.com/u/wiperhunter2)\
**Post date:** [March 23, 2014, 8:31pm UTC](https://forum.bigfishtackle.com/t/merc-outboard-motor-question/233259/5 "2014-03-23T20:31:15Z")

</div>

I agree with Curt, try some Sea Foam. Is your motor a 4 stroke or two stroke? Is this your first time you have had the boat out this year? If it is a 2 stroke and this is the first time having it out for the year, the Sea Foam should fix your problem.

---

<div class="post-metadata">

**Author:** ![JayWeymouth](https://avatars.discourse-cdn.com/v4/letter/j/34f0e0/32.png) [@JayWeymouth](https://forum.bigfishtackle.com/u/JayWeymouth)\
**Post date:** [March 23, 2014, 10:15pm UTC](https://forum.bigfishtackle.com/t/merc-outboard-motor-question/233259/6 "2014-03-23T22:15:41Z")

</div>

About the fourth time out this year. I think this was the first time that that I actually “punched” it to full throttle. It is a two stroke. Thanks.

---

<div class="post-metadata">

**Author:** ![wiperhunter2](https://avatars.discourse-cdn.com/v4/letter/w/3d9bf3/32.png) [@wiperhunter2](https://forum.bigfishtackle.com/u/wiperhunter2)\
**Post date:** [March 23, 2014, 10:34pm UTC](https://forum.bigfishtackle.com/t/merc-outboard-motor-question/233259/7 "2014-03-23T22:34:53Z")

</div>

This is a common problem with 2 stroke motors that do no use either Stibil(sp?) or Sea Foam. They sit during the Winter and the oil gels in the ports causing problems the next year. It can also happen with 4 stroke motors but isn’t as common. A lot of auto stores carry Sea Foam but I usually buy mine at O’Rilley/Checker but Napa and I think Auto Zone carries it. To maintain my engine I use one oz put gallon of gas but to clean a clogged engine I would double that, maybe even triple it if a double doze does not work.

---

<div class="post-metadata">

**Author:** ![JayWeymouth](https://avatars.discourse-cdn.com/v4/letter/j/34f0e0/32.png) [@JayWeymouth](https://forum.bigfishtackle.com/u/JayWeymouth)\
**Post date:** [March 23, 2014, 11:09pm UTC](https://forum.bigfishtackle.com/t/merc-outboard-motor-question/233259/8 "2014-03-23T23:09:40Z")

</div>

Thanks again. I do use a stabilizer for storage and also when I fill up on and off. I will try the sea foam.

---

<div class="post-metadata">

**Author:** ![wiperhunter2](https://avatars.discourse-cdn.com/v4/letter/w/3d9bf3/32.png) [@wiperhunter2](https://forum.bigfishtackle.com/u/wiperhunter2)\
**Post date:** [March 24, 2014, 12:10am UTC](https://forum.bigfishtackle.com/t/merc-outboard-motor-question/233259/9 "2014-03-24T00:10:41Z")

</div>

Stabilizer is cheaper to use than Sea Foam and a lot of members use the Marine Stabil because it also helps with the ethnol that is in most gas now days.
