Boat slip during bunker replacement

[Tin-Can]

I know this is several months behind your original post. I just saw it. Had been changing the bunks for my 14 ft. Lund same way many here have stated. Put the boat in the water at Willard south, replace the bunks in the parking lot. This year I did something a bit different. I got 2 pieces of 2x4 Trex 10 feet long. Drilled the holes for the stove bolts, counter sunk them so the bolt heads are recessed. Mounted the 2x4 to the bunk brackets, then carpeted it with gray indoor / outdoor carpet from Lowes. Wrapped the carpet around to the bottom of the planks, and fastened it on with 1 inch course thread hex head screws. Now I shouldn't need to replace the planks any more (Trex is water proof) and can replace the carpet as needed without pulling the bunk off.
[signature]