05-17-2016, 03:14 PM
It should be mounted flush with the bottom of the boat. Then try tilting it up a hair or down a hair if there is still issues.
I have never had a problem zero to 40 mph with mine and the bottom of my HB transducer is flush with the bottom of the boat. At least irt bottom depth readings. I lose a good sonar picture above 5-6 mph.
![[Image: TrackerV175WT142.jpg]](http://outlawrc.com/stuff/fishing/TrackerV175WT142.jpg)
![[Image: TrackerV175WT144.jpg]](http://outlawrc.com/stuff/fishing/TrackerV175WT144.jpg)
![[Image: TrackerV175WT145.jpg]](http://outlawrc.com/stuff/fishing/TrackerV175WT145.jpg)
It has been many many years but I did have a issue a couple trips with losing bottom depth at speed. I "think" it was the surface clutter setting. Somewhat guessing since I don't really remember what I adjusted back then.
I get a pretty decent rooster tail out the boat from my transducer.
Tom
[signature]
I have never had a problem zero to 40 mph with mine and the bottom of my HB transducer is flush with the bottom of the boat. At least irt bottom depth readings. I lose a good sonar picture above 5-6 mph.
It has been many many years but I did have a issue a couple trips with losing bottom depth at speed. I "think" it was the surface clutter setting. Somewhat guessing since I don't really remember what I adjusted back then.
I get a pretty decent rooster tail out the boat from my transducer.
Tom
[signature]