05-06-2016, 01:37 PM
[#0000FF]Sounds like you at least have a direction in which to start. I can tell you from personal experience that you need to plan, measure and cut as you go. The remeasure, recut, curse and reattach. And be prepared for reworking after your first one or two trips on the water...when you find out what reality is and formulate some new ideas that might work better.
You didn't mention how experienced you are working with PVC. Here is a writeup I put together for the PVC challenged. Doesn't cover every eventuality but at least might help save a few missteps.
[/#0000FF]
[signature]
You didn't mention how experienced you are working with PVC. Here is a writeup I put together for the PVC challenged. Doesn't cover every eventuality but at least might help save a few missteps.
[/#0000FF]
[signature]