07-06-2014, 03:44 PM
[#0000ff]Both Janns and Barlows have stainless wire for leader making. The key will be to decide what size you want...for bending and for strength.
I have a drawer full of different size wire from .016 to .051. Anything over about .035 works for spinner baits and should work for clevices...and you can still bend it with round nose pliers. After .051 you will need a wire bending jig to work with it.
If you get down this way I'd be happy to show you the different sizes and suggest some ways to make clevices.
[/#0000ff]
[signature]
[#0000FF]EDIT: Plus, I have a bunch of different clevices in stock you could try to see if any of them work.[/#0000FF]
I have a drawer full of different size wire from .016 to .051. Anything over about .035 works for spinner baits and should work for clevices...and you can still bend it with round nose pliers. After .051 you will need a wire bending jig to work with it.
If you get down this way I'd be happy to show you the different sizes and suggest some ways to make clevices.
[/#0000ff]
[signature]
[#0000FF]EDIT: Plus, I have a bunch of different clevices in stock you could try to see if any of them work.[/#0000FF]