02-23-2014, 03:47 AM
Thanks for all the replies.
For the quick inflation I am using this:
http://www.google.ca/imgres?hl=en&biw=12...=0&ndsp=18
That gets it filled quick, but them I lose air when removing the air tube and closing the valve. So then i try with this:
http://i.walmartimages.com/i/p/00/73/78/...00X500.jpg
That's when the tube pops out. I will try to test it with tape to see if that helps. (it seems to come out at the pump). The center is star shaped, but I looked at some pictures of hakley vs bravo valves on google and they look the same to me.
[signature]
For the quick inflation I am using this:
http://www.google.ca/imgres?hl=en&biw=12...=0&ndsp=18
That gets it filled quick, but them I lose air when removing the air tube and closing the valve. So then i try with this:
http://i.walmartimages.com/i/p/00/73/78/...00X500.jpg
That's when the tube pops out. I will try to test it with tape to see if that helps. (it seems to come out at the pump). The center is star shaped, but I looked at some pictures of hakley vs bravo valves on google and they look the same to me.
[signature]