04-10-2012, 03:52 PM
I had a Minn 30 and to me, it is too short of shaft. I like that blade "at least" a good 3 to 4 inches away from the bottom of my toon. If you bump into a log or something under water, it will push that prop in towards the bottom of the toon.
I went with the larger thrust because of the 36" shaft over the 30".
If I come into shallower water, I reach back and kick the motor up.
I might try the 30" on my Assault because it is a smaller diameter.
[signature]
I went with the larger thrust because of the 36" shaft over the 30".
If I come into shallower water, I reach back and kick the motor up.
I might try the 30" on my Assault because it is a smaller diameter.
[signature]