07-31-2011, 10:58 AM
another thing is a hot bearing draws water in when you back into the water,one other thing is you should pull the the wheels,and hubs off every spring and clean and inspect the bearings and spindle.make sure there isnt any rust,or pitting.replace the seals'if you need any help on doing this i can give you a hand.
if you us just water to hose down everything the saltwater still leaves a residue,that is corrosive.i use saltaway.on everything and works great
also make sure the grease your useing is wheel bearing grease.there is alot of different kinds out on the market.most are too thin .wheel bearing grease is thik and tacky and is ment for extrem heat
[signature]
if you us just water to hose down everything the saltwater still leaves a residue,that is corrosive.i use saltaway.on everything and works great
also make sure the grease your useing is wheel bearing grease.there is alot of different kinds out on the market.most are too thin .wheel bearing grease is thik and tacky and is ment for extrem heat
[signature]