06-10-2011, 01:28 PM
There are two sizes, but they are obvious. One set is for the bigger Drift Boat size oars.
http://www.nrsweb.com/shop/product.asp?pfid=1404
You will want to have them a little loose at first until you get the oars in position you want. Keep in mind, you will now have a left and right due to the angle of the blade, but you do with the clamp on also. Mark one oar helps.
Take a screw driver out with you and once you get them adjusted, tighten up. One more question, the OARS should have a black PVC sleeve (right were it rests in the horse shoe - about 10" long) so that it isn't metal to metal.
[signature]
http://www.nrsweb.com/shop/product.asp?pfid=1404
You will want to have them a little loose at first until you get the oars in position you want. Keep in mind, you will now have a left and right due to the angle of the blade, but you do with the clamp on also. Mark one oar helps.
Take a screw driver out with you and once you get them adjusted, tighten up. One more question, the OARS should have a black PVC sleeve (right were it rests in the horse shoe - about 10" long) so that it isn't metal to metal.
[signature]