04-02-2011, 01:26 PM
[cool][#0000bf]Most rod handles are about 1"...cork or foam. There are 2 types of PVC tubes...schedule 40 and class 200. The former has much thicker walls and is designed for plumbing installations for higher water pressure. Class 200 is the same outside diameter and takes the same 1" PVC fittings, but has thinner walls and will take 1" rod handles. If you use schedule 40 PVC pipe for your rods you will need to go up to the 1 1/4" tube size. Much bigger and heavier.
Home Depot no longer carries class 200 but Lowes usually does. Otherwise you may need to check with a sprinkler and irrigation supply.
I have just completed new PDF writeups on PVC construction and on Rod Holders. The latest one is over 40 pages and has over 120 pictures. Lots of installation ideas...my own and other members. I will be happy to send it to members who request it but not going to post it on public forum. PM me after 4/10
[/#0000bf]
[signature]
Home Depot no longer carries class 200 but Lowes usually does. Otherwise you may need to check with a sprinkler and irrigation supply.
I have just completed new PDF writeups on PVC construction and on Rod Holders. The latest one is over 40 pages and has over 120 pictures. Lots of installation ideas...my own and other members. I will be happy to send it to members who request it but not going to post it on public forum. PM me after 4/10
[/#0000bf]
[signature]