08-29-2010, 06:11 PM
Depending on the motor well configuration, sometimes the motor has to be removed to pull the cable out of the tilt tube, there should be a 1 1/8 (usually on the right side) nut on the cable that has to be loosened from the tilt tube. most of the older cables are no longer available so the system will have to be updated, the kits include a new helm and cable all you need to know is length and whether it is rack & pinion or rotory. the best thing to do is take the cable in and match it up at your local marine store. From my experience Marine products stocks a lot of these systems. Their number is 801-973-4017. Hope this helps.
[signature]
[signature]