07-23-2003, 06:50 PM
[cool]You may choose to do with it what I do with all of the repair kits I get. Toss them out and buy a tube of AquaSeal. If you want a faster curing time (2 hours instead of 24 hours) also buy a bottle of the Cotol cleaner and accelerant. This is the best stuff for repairing most air bladders and waders. You just squeeze out a little, smooth it over the leak and let it cure into a flexible patch.
Most of the patch kits I have used don't work worth a hoot. You might as well use them as "accessories"...for your other bad habits.
About the tubes and such, I can only guess that they may be valve inserts, for a boston valve. Keep them, just in case.
On that Aquaseal, once you open it, keep it in the freezer (closed back up). It will keep for many months between uses. Most of the patch kits will have the adhesive dry up after the tube is first opened...no matter how tight you close it.
If you do want to use the patch kit, you cut a piece of the patch material to overlap the hole by at least a half inch. Squeeze a bit of the adhesive on both the patch and the air bladder and spread it around to the size of the patch. When the adhesive dries to "tacky", press the patch onto the prepared spot on your bladder. Press around all the edges with the blunt end of a table knife or a screwdriver handle...on a hard surface. let it dry and cure for a few hours before airing it back up.
NOW...be careful. Just cause you got a patch kit doesn't mean you can go fighting your way through broken glass and barbed wire. Or, down here in Arizona it does not give you immunity to cactus spines when you hike around a local desert lake.
[signature]
Most of the patch kits I have used don't work worth a hoot. You might as well use them as "accessories"...for your other bad habits.
About the tubes and such, I can only guess that they may be valve inserts, for a boston valve. Keep them, just in case.
On that Aquaseal, once you open it, keep it in the freezer (closed back up). It will keep for many months between uses. Most of the patch kits will have the adhesive dry up after the tube is first opened...no matter how tight you close it.
If you do want to use the patch kit, you cut a piece of the patch material to overlap the hole by at least a half inch. Squeeze a bit of the adhesive on both the patch and the air bladder and spread it around to the size of the patch. When the adhesive dries to "tacky", press the patch onto the prepared spot on your bladder. Press around all the edges with the blunt end of a table knife or a screwdriver handle...on a hard surface. let it dry and cure for a few hours before airing it back up.
NOW...be careful. Just cause you got a patch kit doesn't mean you can go fighting your way through broken glass and barbed wire. Or, down here in Arizona it does not give you immunity to cactus spines when you hike around a local desert lake.
[signature]