Floding chair rod holder

[idahopanfish]

Here's an idea I came up with, let me know what you think.

3/4" tee with 1/4" cut off so I could pop it on chair leg.

[inline "PICT0851 (Small).JPG"]
1" tee will slide on the end of the 3/4" tee

[inline "PICT0852 (Small).JPG"]
or you can use an 90 deg elbow with a 1" tube cut out to hold a reod end and reel

[inline "PICT0854 (Small).JPG"]
since nothing is glued the tee's will rotate slide up and down the chair led and are removable for storage and transport ( the tee on the leg is not in the way so alows the chair to fold up with out removing it)

[inline "PICT0855 (Small).JPG"]
[signature]