05-02-2008, 02:29 PM
[#000000]well, yea you could use a similar top section as long as it fits like the old piece. it will change the action but it could work. take a look at mudhole.com it's a rod building site that has all the works for rod building.[/#000000]
things you will need
thread, size A
color preserver
flex coat
something to hold the rod as you turn it, a small box will work with a "V" cut in each end to hold the rod.
somthing to hold tension on the thread as you wrap. a book will work ok for this. just run the thread thru the middle and close the book. sometimes you need to add some weight on the book to get more tension.
once you have all the wrapping done apply color preserver and let dry then apply the flex coat. flex coat is the finish and and it takes a long time to cure. it has to be rotating at a slow speed as it dries or it will run. hope this helps, later cuck
[signature]
things you will need
thread, size A
color preserver
flex coat
something to hold the rod as you turn it, a small box will work with a "V" cut in each end to hold the rod.
somthing to hold tension on the thread as you wrap. a book will work ok for this. just run the thread thru the middle and close the book. sometimes you need to add some weight on the book to get more tension.
once you have all the wrapping done apply color preserver and let dry then apply the flex coat. flex coat is the finish and and it takes a long time to cure. it has to be rotating at a slow speed as it dries or it will run. hope this helps, later cuck
[signature]