04-30-2008, 04:56 AM
[#000000]well, you could do that, it depends on how the two pieces go together. some have metal furrels that slide together with the top section being the smaller side. then other rods have the top section bigger around where the rod pieces slide together. as long as the two pieces slide together and fit tight you should be good to go. the tip guide will come off with the use of a lighter, just heat the tip up and pull[/#000000]
it off. the other guides will have to have the thread cut off.
wrapping the guides on is really no big deal. you just need a few things. some way to hold the rod and be able to turn it and a way to hold tension on the thread. or if you want, I can wrap the guides for you. I have wrapping machine and do this kind of stuff on the side.
you can send me a PM if you'd like. later chuck
[signature]
it off. the other guides will have to have the thread cut off.
wrapping the guides on is really no big deal. you just need a few things. some way to hold the rod and be able to turn it and a way to hold tension on the thread. or if you want, I can wrap the guides for you. I have wrapping machine and do this kind of stuff on the side.
you can send me a PM if you'd like. later chuck
[signature]