Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Lowrance X67c Ice Machine Modified
#20
[font "Comic Sans MS"][size 2][#002850]So Kent, my next question is; Can one purchase a bell shaped transducer for any (or most) Lowrance sonar?

Also, I wouldn't want to use your setup on my transducer and cable simply because the weight of the ducer might cause premature breakage in the cable. I think that is the reason for the rod support hole through my ducer.

Hey ... that just gave me an idea ... instead of the metal float rod through my ducer's hole, put a smal rope (or large string) through it and then use the Vexlar system you showed connected to the string so that there is no stress on the ducer cable. That way I could achieve the same depth and verticality that you are but with my ducer. Hummmm ....
[signature]
Reply


Messages In This Thread
Lowrance X67c Ice Machine Modified - by Old_Coot - 12-16-2007, 04:56 PM
Re: [kentofnsl] Lowrance X67c Ice Machine Modified - by Old_Coot - 12-17-2007, 04:40 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)