09-11-2007, 05:12 AM
[center][url "http://www.bigfishtackle.com/photos/showphoto.php/photo/8057/cat/574"]![[Image: Line_under_spinnerhead.JPG]](http://www.bigfishtackle.com/photos/data/574/thumbs/Line_under_spinnerhead.JPG)
[/url][/center][center]in this photo you can see line when over filled can wind up under the spinnerhead. If you have this type press the caster button and look for line that may still be under there from prevoius break offs.[/center] [center] [/center] [center] [/center] [center][url "http://www.bigfishtackle.com/photos/showphoto.php/photo/8056/cat/574"]![[Image: spinner_head_lifting_ring.JPG]](http://www.bigfishtackle.com/photos/data/574/thumbs/spinner_head_lifting_ring.JPG)
[/url][/center] [center] [/center] [center]with this modle, there is a spinnerhead lifter ring, if the rubber is worn off or you have a sharp edge it can cut or pinch the line when casting causing it to snap.[/center]
[signature]
[/url][/center][center]in this photo you can see line when over filled can wind up under the spinnerhead. If you have this type press the caster button and look for line that may still be under there from prevoius break offs.[/center] [center] [/center] [center] [/center] [center][url "http://www.bigfishtackle.com/photos/showphoto.php/photo/8056/cat/574"][/url][/center] [center] [/center] [center]with this modle, there is a spinnerhead lifter ring, if the rubber is worn off or you have a sharp edge it can cut or pinch the line when casting causing it to snap.[/center][signature]