Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
hookie
#7
i used to be able to get in behind the golf course , but my contact has since passed on [angelic] .

there is a lutheren church where you may be able to fish behind .just a little south east of gibralter road and huron river drive area .

about 50 yards south of the walk bridge in flatrock there is an store , it was a bait store at one time , is now either an arcade or an appliance store now . there is a big hole right behind it , dead center of the river .

i have seen more steel come out of the very bottom , left side of the walk bridge before you cross . 3-4 feet from that corner . right shoulder should be able to touch the walk bridge . single egg presentation works best , just let it swirl in the water there , 1/16 oz wt. coho use that corner to come up too !

huron river drive in the rockwood area is good but no parking unless you can get permission from a land owner , stay away from the abandoned sewer or cement plant with the small park on the oppisit side REBAR IN THE WATER !

by the train tressel and huron river drive in rockwood is a good area too .

some of the land owners will grant permission , they get ticked off at the guys that don't .

i knew i should have saved my maps !
[signature]
Reply


Messages In This Thread
hookie - by stormy26 - 03-27-2003, 03:04 PM
Re: [stormy26] hookie - by lonehunter - 03-27-2003, 09:06 PM
Re: [stormy26] hookie - by stormy26 - 03-27-2003, 09:27 PM
Re: [stormy26] hookie - by davetclown - 03-27-2003, 11:25 PM
Re: [stormy26] hookie - by lonehunter - 03-29-2003, 12:46 PM
Re: [lonehunter] hookie - by stormy26 - 03-31-2003, 12:09 PM
Re: [stormy26] hookie - by lonehunter - 04-01-2003, 12:01 AM
Re: [stormy26] hookie - by lonehunter - 04-01-2003, 12:05 AM
Re: [lonehunter] hookie - by stormy26 - 04-03-2003, 12:35 PM
Re: [stormy26] hookie - by lonehunter - 04-03-2003, 02:51 AM
Re: [lonehunter] hookie - by stormy26 - 04-03-2003, 12:40 PM
Re: [stormy26] hookie - by lonehunter - 04-03-2003, 10:01 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)