04-27-2007, 07:13 PM
[center][url "http://www.bigfishtackle.com/photos/showphoto.php/photo/6737/cat/500/ppuser/89"]![[Image: DSCN0355.JPG]](http://www.bigfishtackle.com/photos/data/500/thumbs/DSCN0355.JPG)
[/url][/center]the mounts are installed, boat wireing compleated, and guess what? the horn works [sly] in the illistration you will see I left me anough line to reach it from my seat and short enough where I can tuck it back out of the way safely.
the ancor mount is installed, in the photo you are looking at the back side of it. again it rides in a place away from traffic. I chose to do this because on long trips I wanted to reduse all wind drag and vibrations that may be caused by shakeing of the boat and wind.
working lights were another story, I realy expected them to work when I hooked up the battery, but they didnt, so I scratched my head and figured that the only place there could be a problem was on the fuse switch box. which ment having to pull the glove box back out one more time. [
] on the up side, I needed to pull it any way because I never seeled the wire conections behind the box, I was waiting to make sure every thing worked before I put the liquid tape on all the conections. [
]
after pulling the box, I found that I forgot to plug the hot wire in to the switch box...[angelic] Pluged it in and all was right in the world again...[cool]
[center][url "http://www.bigfishtackle.com/photos/showphoto.php/photo/6738/cat/500/ppuser/89"]![[Image: DSCN0356.JPG]](http://www.bigfishtackle.com/photos/data/500/thumbs/DSCN0356.JPG)
[/url][/center] [left]Fire Extinguisher mount installed in most accessible location and least amount of traffic area.[/left] [left] [/left] [left]the boat itself is now ready for fishing action, I do want to cut a thin peice of presure treated plywood for under the battery.[/left] [left] [/left] [left]if the motor runs tomarow that would be great, but I am not counting on it, I have oars and an electric trolling motor that will put me on the fish "I hope"[sly][/left]
[signature]
[/url][/center]the mounts are installed, boat wireing compleated, and guess what? the horn works [sly] in the illistration you will see I left me anough line to reach it from my seat and short enough where I can tuck it back out of the way safely. the ancor mount is installed, in the photo you are looking at the back side of it. again it rides in a place away from traffic. I chose to do this because on long trips I wanted to reduse all wind drag and vibrations that may be caused by shakeing of the boat and wind.
working lights were another story, I realy expected them to work when I hooked up the battery, but they didnt, so I scratched my head and figured that the only place there could be a problem was on the fuse switch box. which ment having to pull the glove box back out one more time. [
] on the up side, I needed to pull it any way because I never seeled the wire conections behind the box, I was waiting to make sure every thing worked before I put the liquid tape on all the conections. [] after pulling the box, I found that I forgot to plug the hot wire in to the switch box...[angelic] Pluged it in and all was right in the world again...[cool]
[center][url "http://www.bigfishtackle.com/photos/showphoto.php/photo/6738/cat/500/ppuser/89"]
[/url][/center] [left]Fire Extinguisher mount installed in most accessible location and least amount of traffic area.[/left] [left] [/left] [left]the boat itself is now ready for fishing action, I do want to cut a thin peice of presure treated plywood for under the battery.[/left] [left] [/left] [left]if the motor runs tomarow that would be great, but I am not counting on it, I have oars and an electric trolling motor that will put me on the fish "I hope"[sly][/left][signature]