02-19-2007, 12:29 PM
[cool][#0000ff]There are several places (like Barlows) that have plastic lure making supplies, including molds. I think one of the best bets for you is [url "http://www.lurecraft.com/catalog.cfm/molds/plastic-molds"]LURECRAFT[/url] (link). You might have to spend some time looking through all of the different molds they list, but they have pics of the final products.[/#0000ff]
[#0000ff][/#0000ff]
[#0000ff]I doubt that you will be able to find a mold that has the split tails like on tube jigs, but this same supplier sells a "splitter" for about $30 if you can find the mold to produce the main lure. Don't know if you are talking about tube jigs or not. They require a "mandrel" to coat with the plastic and then you peel them off and split the tails. Might be some info at Lurecraft.[/#0000ff]
[signature]
[#0000ff][/#0000ff]
[#0000ff]I doubt that you will be able to find a mold that has the split tails like on tube jigs, but this same supplier sells a "splitter" for about $30 if you can find the mold to produce the main lure. Don't know if you are talking about tube jigs or not. They require a "mandrel" to coat with the plastic and then you peel them off and split the tails. Might be some info at Lurecraft.[/#0000ff]
[signature]