Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
recoating an old boat
#2
I painted three aluminum boats in my life,

one an old deap V 17 foot aluminum boat. I used a marian paint that was perchased from a boat retail store. no refinishing was involoved on my part.

second I painted an aluminum canoe after cleaning with xylol aluminum cleaner. it striped off old paint and cleaned the hull completely. I then primed it then painted it with aluminum primer and followed up with aluminum paint. several yars later it flaked off in big flakes.

the last one I did "12 foot aluminum row boat" I buffed the boat with a green schotch brite pad and then applied two coats turtle paist wax on the hull, I paited above the water line with rustolium. no flaking bottom glissens. it is a good idea to wax it every year, since I turn my boat upside down every year come spring it is ready for me to rub down with a schotch brite pad and wax again.

the first time I buffed it by hand was a chore, wished I would have had a power circular buffer.

after waxing the bottom of the boat I swear it glided across the top of the water.

hope this helps.
[signature]
Reply


Messages In This Thread
recoating an old boat - by lakelurker - 12-29-2005, 07:07 PM
Re: [lakelurker] recoating an old boat - by davetclown - 01-15-2006, 07:10 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)