11-05-2005, 12:32 AM
Thanks Dave, its fairly easy to built and lite weight, and,, a good use of Rat Holed materal. [
]
I simply bolted them in place (two bolts each). The uprights are common 1/2" metal conduit and the PVC corner pieces were installed using self tapping screws. The tarp was cut a sewn to fit the frame. Around the bottom of the shell is a sliding cord pocket (for lack of the proper term) which allows the bottom shell to be maintained below the upper lip of the sled with use of pealine in the slide pocket and a bungee attaching the looped ends in the pealine.
[signature]
] I simply bolted them in place (two bolts each). The uprights are common 1/2" metal conduit and the PVC corner pieces were installed using self tapping screws. The tarp was cut a sewn to fit the frame. Around the bottom of the shell is a sliding cord pocket (for lack of the proper term) which allows the bottom shell to be maintained below the upper lip of the sled with use of pealine in the slide pocket and a bungee attaching the looped ends in the pealine.
[signature]