07-16-2005, 09:02 PM
Here is your parts list.
the differance between a 6'X8' shanty and a 8'X8' is 3 pcs 2x4 and one sheet of ply wood.
ok here goes Shopping list for an 8x8 shanty.
[ol] [li]8 foot 2x4 pcs 22[/li] [li]7 f00t 2x4 pcs 26[/li] [li]4'x8' plywood sheets 12[/li] [li]4-6 2x4 side wall mounts. (check builders square)this if for the runners.[/li] [li]8d nails 3-5 pounds[/li] [li]16d nails or screws 5 pounds[/li] [li]1"x2"x8" [/li] [li]3 hindges[/li] [li]1 hasp[/li] [li]20 pcs 1" flathead woodscrews[/li] [li]1/4 pound 2" brads[/li] [li]drip edge 4 pcs 8 foot[/li] [li]roofing material your choice[/li] [li]insulation optional[/li][/ol]
this will probably be close to a 4 man clam in price, what it offerces over a clam is stealth solid as a rock wont rattle in the wind and will heat better than a tent or clam.....
any one who has ever fished in a well build wood shanty will attest to the comfort it will offer, This I am sure you are aware of because you asked for plans on how to build one...
in the disign I am going to provide I did not add vent ports, be sure to add a couple...
[signature]
the differance between a 6'X8' shanty and a 8'X8' is 3 pcs 2x4 and one sheet of ply wood.
ok here goes Shopping list for an 8x8 shanty.
[ol] [li]8 foot 2x4 pcs 22[/li] [li]7 f00t 2x4 pcs 26[/li] [li]4'x8' plywood sheets 12[/li] [li]4-6 2x4 side wall mounts. (check builders square)this if for the runners.[/li] [li]8d nails 3-5 pounds[/li] [li]16d nails or screws 5 pounds[/li] [li]1"x2"x8" [/li] [li]3 hindges[/li] [li]1 hasp[/li] [li]20 pcs 1" flathead woodscrews[/li] [li]1/4 pound 2" brads[/li] [li]drip edge 4 pcs 8 foot[/li] [li]roofing material your choice[/li] [li]insulation optional[/li][/ol]
this will probably be close to a 4 man clam in price, what it offerces over a clam is stealth solid as a rock wont rattle in the wind and will heat better than a tent or clam.....
any one who has ever fished in a well build wood shanty will attest to the comfort it will offer, This I am sure you are aware of because you asked for plans on how to build one...
in the disign I am going to provide I did not add vent ports, be sure to add a couple...
[signature]