04-08-2005, 03:14 AM
[black]I haven't finished yet but am nearly there. I ended up mounting the finder receiver on a curved plastic plate cut from a bucket, running a strap through the plate, and wrapping the strap around the tube. Very stable but it doesn't lift the unit up very high. I'll have to try it on the water soon. If it's too low I'll go back to the pipe or block in the cup holder.
As for the extra cable, I'm thinking of stuffing that into a piece of PVC pipe as Tubedude did with his mount and just leaving it in there with tape on each end. I'll just place this into the pocket on the tube beside the battery. At least that's the theory. Real life tests often temper the seemingly best plans.
zonker
[/black]
[signature]
As for the extra cable, I'm thinking of stuffing that into a piece of PVC pipe as Tubedude did with his mount and just leaving it in there with tape on each end. I'll just place this into the pocket on the tube beside the battery. At least that's the theory. Real life tests often temper the seemingly best plans.
zonker
[/black]
[signature]