Another trip to Rockport with new steering pedals

[lovetofish]

Just do some searching on YouTube. That's where I got all my info from and then made design changes to fit my boat. Almost all of the ideas were from people doing it to their kayaks. I bought most of the material I needed from Lowes especially the springs. The clamps that fit on the motor shaft are 2 pipe hangers. You just use the side that has the nipple (that's why you have to buy two) that the eye bolts screw into. Also, you have to (while lying flat on cement, nipple up) hit the part with the nipple to spread it out a little to fit the motor shaft but not too much.

If you need more help just let me know and I'll try to help you.