03-03-2021, 12:13 AM
(03-02-2021, 02:37 PM)Mildog Wrote: Fill the feet with water, observe where the water leaks out, mark the leaks with permanent marker. Then dry them completely. Use aqua seal and cover the leaking areas with 1/2 inch overlap with a uniform thin layer. Unless the entire foot area is leaking, you should be able to isolate and stop the leaks. Years ago I replaced the entire feet on a pair of waders using Aqua seal and I used those waders for several more years. Good luck
Mildog out
Thanks for the tip. I will give it a try and see how it works out.