01-11-2019, 08:45 PM
EDIT: Thanks to Dog-lover for catching a very obvious mistake in my description of wiring. Red is POSITIVE, black is NEGATIVE.
Basically, red power wire comes from the battery's RED pole (positive), splits or splices and goes separately to both camera and screen via red wires to red wires. This may require that YOU add a long power wire to reach the camera. The black "return" wire (the negative pole on the battery, the black side) also runs back to the battery from the screen. You don't need a return or ground for the camera, so you can clip it off. Then the included signal wire (the long one with yellow couplers) runs from screen to camera.
You will have a red wire for power running from battery to screen, and a black wire for "return" running from screen to battery. You two long wires running to the camera; one for power from the from battery, and one for signal from camera to screen.
I bought my screen and camera separately, and they each came with a 25 foot signal wire (the one with yellow couplers). I used one for signal, cut the couplers off the other and used it for the extra wire to link power to power.
Seal it all up and go.
[signature]
Basically, red power wire comes from the battery's RED pole (positive), splits or splices and goes separately to both camera and screen via red wires to red wires. This may require that YOU add a long power wire to reach the camera. The black "return" wire (the negative pole on the battery, the black side) also runs back to the battery from the screen. You don't need a return or ground for the camera, so you can clip it off. Then the included signal wire (the long one with yellow couplers) runs from screen to camera.
You will have a red wire for power running from battery to screen, and a black wire for "return" running from screen to battery. You two long wires running to the camera; one for power from the from battery, and one for signal from camera to screen.
I bought my screen and camera separately, and they each came with a 25 foot signal wire (the one with yellow couplers). I used one for signal, cut the couplers off the other and used it for the extra wire to link power to power.
Seal it all up and go.
[signature]