Posts: 254
	Threads: 0
	Joined: Jun 2010
	
Reputation: 
0
	 
	
	
		My motor is fine at idle and will run at idle (moving a little faster than trolling speed). When I go to gas it up it will die.  I have messed  with my tuning screw on the carburetor but nothing I do has seemed to help. It is air cooled and is a 4 stroke.  If any one has any tips let me know? Or where to start. I am thinking of possibly doing a rebuild on  the carburetor.
[signature]
	
	
	
	
	
 
 
	
	
	
		
	Posts: 1,287
	Threads: 0
	Joined: Jun 2009
	
Reputation: 
0
	 
	
	
		Been running ethanol?  If so a carb rebuild should get you back up and running.
[signature]
	
	
	
	
	
 
 
	
	
	
		
	Posts: 243
	Threads: 1
	Joined: Aug 2010
	
Reputation: 
0
	 
	
	
		Briggs and Stratton brings back fond memories of go carts and mini bikes as a teenager.  B&S engine use a diaphragm on the carburator that after a while becomes dried out and stiff and I would suspect that's your problem.  Search for "briggs and stratton diaphragm replacement" on youtube and see if there is a how-to that's similar to your model of engine.  Good Luck!
[signature]
	
	
	
	
	
 
 
	
	
	
		
	Posts: 33,245
	Threads: 439
	Joined: Feb 2002
	
Reputation: 
36
	 
	
	
		Do you run SeaFoam in your Fuel?
[signature]
	
	
	
	
	
 
 
	
	
	
		
	Posts: 254
	Threads: 0
	Joined: Jun 2010
	
Reputation: 
0
	 
	
	
		I have ran SeaFoam before when I first had this problem.  Didn't help much. I think it is the diaphragm and ordered a new one to see if that will help out. Did a search and found a guy had the same problem and changed his diaphragm and it helped so thanks for the tips. If it doesn't help I guess I will try a carb rebuild.
[signature]